Miller H500 Arc Flash Twin Leg Lanyard with Rebar Hooks 1.8m (FPLARCM-TEU)

Miller H500 Arc Flash Twin Leg Lanyard with Rebar Hooks 1.8m (FPLARCM-TEU)

Working at height around electrical components brings two hazards together, a fall and an arc flash. This Miller H500 Arc Flash lanyard is made with electric arc-resistant tape and is designed to go on arresting a fall after exposure to an arc. The supplier reports third-party testing to ASTM F887 at an arc energy of 40 cal/cm².

Key features

• Arc-resistant tape: Used for the lanyard and for the harness connection point.
• Twin legs with 65 mm hooks: Two rebar hooks, each with a 65 mm opening.
• Energy absorber: Built into the lanyard to absorb the shock of a fall.
• Self-extinguishing design: The H500 Arc Flash series is designed to self-extinguish quickly and to prevent melting or dripping.
• Label pouch: A protected pouch keeps the product label readable.

Typical uses

Work at height where an arc flash risk has been identified, in sectors such as utilities, railway, construction, manufacturing and civil engineering. Selection should follow the site's risk assessment.

Specification

• EN 354:2010
• EN 355:2002
• ASTM F887-20
• Length: 1.8 m
• Webbing: polyamide
• Connectors: two rebar hooks, 65 mm opening
• PPE Category III
• Colour: Black
• Sold each