Miller H500 Arc Flash Single Leg Lanyard with Rebar Hook 1.8m FPLARCM-SEU

Miller H500 Arc Flash Single Leg Lanyard with Rebar Hook 1.8m FPLARCM-SEU

Part of the Miller H500 Arc Flash series, this single-leg energy-absorbing lanyard is made for people who work at height near electrical equipment. Its webbing is designed to self-extinguish quickly and not melt or drip if an arc flash occurs, and the lanyard has been third-party tested to ASTM F887 for fall arrest after an electric arc of 40 cal/cm².

Key features

• Arc-resistant webbing: The body of the lanyard is 1.8 m of polyamide webbing in electric arc-resistant tape.
• Energy absorber: A shock-absorbing section is built in for fall arrest use.
• Rebar hook: The hook has a 65 mm opening for connecting to the anchor.
• Harness connection: The harness attachment point is made from the same arc-resistant tape.
• Protected label: A pouch covers the product label.

Typical uses

Work at height where arc flash has been identified as a hazard, in sectors such as utilities, construction, civil engineering, manufacturing and rail. It can be paired with the H500 Arc Flash harness from the same series, and selection should follow the site's risk assessment.

Specification

• Standards: EN 355:2002, EN 354:2010, ASTM F887-20
• Arc flash test level: 40 cal/cm²
• Length: 1.8 m
• Webbing: polyamide, electric arc-resistant
• Connector: rebar hook with 65 mm opening
• Colour: Black
• PPE Category: III
• Sold as: Each